DTF Hot Melt Adhesive Powder — Material Safety Data Sheet
Description
Color Prime Hot Melt Adhesive Powder is an essential component of any Direct-to-Film (DTF) printing workflow. Specially formulated for high-quality garment transfers, this adhesive powder ensures strong bonding and vibrant color results on a variety of fabrics — including 100% cotton, polyester, nylon, and more.
Key Features
-
Produces a solid white base after baking for brighter, more vivid colors
-
Even, consistent particle size for smooth graphics and reliable adhesion
-
Compatible with DTF Station Warm Peel Film and most DTF printers
Available Sizes
-
White: 1 kg, 20 kg
-
Black: 1 kg
Application Instructions (with DTF Station Warm Peel Film)
-
Print: Print your image in mirror mode (CMYK → White Ink) onto the matte side of the film.
-
Apply Powder: Evenly coat the printed film with hot melt powder and remove excess.
Cure the Adhesive:-
Heat press hover: 340°F for 5 minutes, or
-
Curing oven: 300–315°F for 1 minute.
-
-
Transfer: Press the design at 330°F for 15-30 seconds depending on your machine with medium pressure.
-
Peel:
-
Option 1: Wait 4–6 seconds and peel gently.
-
Option 2: Lightly rub the surface with a cloth to cool, then peel gently.
-
-
Final Press: Repress at 330°F for 5–10 seconds with medium pressure to enhance softness and durability.
⚠️ Safety & Handling Warning
-
Do not ingest or inhale the powder — harmful if swallowed.
-
Avoid direct contact with skin and eyes; may cause irritation.
-
Wear protective gear: gloves, mask, and appropriate clothing when handling.
-
In case of eye contact, rinse immediately with plenty of water.
-
If ingestion or allergic reaction occurs, seek medical assistance immediately.
Important:
Never apply hot melt powder directly on a DTG printer platen. Always apply away from the printer to prevent adhesive powder from being drawn into the printer’s internal fans. Improper application may cause damage not covered under warranty.